双油管井口(Dual Tubing Wellhead)是多层油藏开采的关键设备,通过一套装置集成两根独立油管柱,可同步开采并管理井下两个不同油层,其核心优势在于既能针对两层不同压力、产能特性制定差异化方案以避免层间窜流、提升采收率,又能凭借完全独立的控制与监测系统,让单层作业(如修井、压裂)不影响另一层生产,同时还能通过单井实现两层开采减少占地与建井成本,并依靠独立应急设计降低安全风险。
Single Barrel Double Well Technology is an advanced conductor-sharing drilling technology designed for specific scenarios in offshore oil and gas development. It is particularly suitable for offshore marginal oilfield development and adjustment well operations — the former is characterized by relatively limited reserves and high sensitivity to development costs, while the latter plays a key role in well-pattern optimization in the mid-to-late stage of oilfield development. Both impose high requirements on space-utilization efficiency and development cost-effectiveness. The core advantage of this technology is that it breaks the conventional mode of one well-slot for one wellbore. It enables accurate drilling of two directional wells within a single well-slot and delivers an efficient configuration where two wells share one set of conductor pipes. Given the common space constraints of offshore platforms, this design makes full use of limited well-slot resources to drill more wellbores and prevents development scale from being restricted by insufficient well-slots. Meanwhile, it eliminates the need for additional conductor procurement and installation, optimizing platform spatial layout and reducing upfront engineering investment. Highly compatible with the development requirements of cluster-well platforms, this technology improves well-pattern density by increasing the number of wells drilled per well-slot, helping cluster-well platforms cover reservoir areas more efficiently.
纽威石油设备的井口采油树装置能够满足陆上/海洋平台应用中一系列包括灵活性、兼容性和互换性的要求。同时,纽威能够满足各种详细的要求、更具竞争力的价格和所需的标准件。 采油树是自喷井和机采井等用来开采石油的井口装置。它是油气井最上部的控制和调节油气生产的主要设备,主要由套管头、油管头、采油(气)树本体三部分组成。
超大通径地热井口装置能够承受极高的温度和压力,适用于高温、高压的地热井环境。 同时具备良好的密封性,防止空气进入系统,减轻对金属设备的腐蚀。
电潜泵井口装置通常由井口采油树、电缆穿通器、密封装置等组成。其设计允许电缆穿过井口并连接到井下的电潜泵,同时确保井口的密封性。
注采排卤井口装置不仅具备常规的注气和采气功能,还集成了排卤功能,能够满足储气库建设初期排除卤水的需求。 为了排除腔体内的卤水,注采管柱内需下入排卤管柱,且注采排量大,因此注采管柱直径相对较大,配套工具选配困难。
为满足高压气体的快速注采需求,注采井口装置通常采用大通径设计,减少气体流动阻力,提高注采效。 注采井口装置需承受高压环境,同时在盐穴等储气空间中使用时,还需具备良好的耐腐蚀性能。
套管头是井口组件的最下部分,通常与地面最外层套管相连。它为后续井口设备和完井设备提供支撑。
油管头安装在最上部套管头上面,用于支撑油管柱重力,密封油管和油层套管之间环空。
卡瓦式悬挂器提供了一种将套管的重量或者张力载荷传递至套管头的方法,有自动激发和手动激发两种类型,自动激发的密封是由套管重量驱动,手动激发的密封则套管坐到位之后再通过手动拧紧螺栓来激发密封。手动激发悬挂器通常在套管载荷不足时使用。
压裂树是井口的压裂通道,通过多只阀门的组合开关达到在现场作业不同阶段时的需求,通常以两只手动闸阀、一只液动闸阀构成。
高压万向管汇也称为E字压裂管汇,其将接收液压压裂液(压裂液)的ZIPPER模块连接传送到液压压裂树(压裂树)中,用于压裂油气井。 压裂树和ZIPPER模块一般位于油气田,其可以跨过不平坦的地形并且具有不同的高度,这使得传统上难以将两者连接起来的模块得以连接。